半鋼子午線輪胎自動修毛機
設備用途 Equipment use
輪胎經硫化機定型后自動修剪輪胎毛頭的理想專用設備。
It is the ideal dedicated equipment for automatic trimming of tyre burr after being shaped by curing press
設備特點Equipment characteristics
進胎、檢測、夾持、定位、修剪、出胎全自動完成，無需人工干涉。修剪毛頭銷率高、質量好、修剪輪胎規格范圍廣。
The operation of tyre feeding, detecting, clamping, positioning, trimming and discharging are fully automatic and they do not need any artificial interference. The efficiency of burr trimming is high, quality is good with wide range of applicable trimmed tyre.
|
主要技術參數Main technical parameters |
|
序號 № |
適用輪胎規格
Applicable tyre specification |
使用輪胎修建范圍
Applicable tyre construction range |
適用輪胎修剪外徑
Applicable tyre trimming outer diameter |
|
1 |
12〞:22〞 |
胎面/胎側 Tread/side wall |
Ф550mm-Ф850mm |
|
2 |
適用輪胎修剪高度
Applicable tyre trimming height |
適用輪胎最大重量
Applicable maximum tyre weight |
修剪后標準毛頭長度
Standard burr length after trimming |
|
3 |
135mm-300mm |
Max.45kg |
0.7mm-1.5mm |
|
4 |
胎面修剪時間
Tread trimming time |
胎側修剪時間
Side wall trimming time |
輪胎修剪產量
Tyre trimming capability |
|
5 |
12秒 12s |
14秒14s |
21-27秒/條21-27s/pc |
蘇公網安備
32020602001290號